Email Us 

 

 Site Search 

 

 Site Map 

 

 Home 

 
     
LGE GasGuard LG50 Series Nozzle Click photo for enlargement

Products > LPG/NH3 Equipment >

 

LG50 SERIES NOZZLE
The Gasguard LG50 Series Nozzle has been developed to fit the 'Italian' type fill adaptor. It incorporates many design features that create a robust, low maintenance Nozzle.
 
Standard Features
bullet

The LG50 Nozzle is robustly designed to couple to the standard EU67 Italian (Dish) Fill Adaptor plus it features LG Equipment's new Pressure Seal Technology.
bullet

A self-locking Connector Assembly automatically locks into the Dish Adaptor when the Nozzle is simply pushed into the Adaptor and the lever activated.
 
Click for enlargement
bullet

The LG50 will not discharge LPG to atmosphere and must be connected to the Dish Adaptor to allow product flow.
bullet

The Nozzle cannot be released from the Dish Adaptor whilst filling.
bullet

Incorporates a robust Inlet Swivel available in 1/2" and 3/4" Female NPT, or 1" BSPG thread. The Swivel is fully maintainable.
bullet

The LG5SL Lever Assembly through the use of its Lever Slippers, has a proven record of minimising wear in this critical area of the Nozzle.
bullet

There is 1.9cc of product discharged on release of the Lever (relative to the nozzle only).
bullet

Flow rates are comparable to the LG1 and LG20 Series Nozzles. Δ1bar = 47 lpm.
bullet

A Filter (LG9) can be fitted to the Nozzle (optional).
bullet

A Lever hold-open Latch is fitted as standard.
 
Dimensions and Nozzle Sub-assemblies
 
Specifications
  1. Coupling System - 'Italian Type' - using four s/s locking arms.
  2. Inlet Swivel thread - 1/2" and 3/4" Female NPT, or 1" BSPG.
  3. Nett mass - 1.8 kg (3.9 lbs).
  4. Maximum operating pressure - 2450 kPa (350psi).
  5. LP Gas discharged on Lever release - 1.9cc (Nozzle only).
  6. Nozzle Body material - AS 701 aluminium alloy.
  7. Nose Piece and Ball Retainer stainless steel.
  8. Seals - Valve seat - low temperature viton.
             - Nose Seal and 'U' Cup Seal - polyurethane.
             - 'O' Ring Seals - low temperature nitrile.
Accessories
Seal Repair Kits:
  1. LG53 - complete Seal kit for the LG50 Nozzle.
  2. LG53SW - Seal kit for Swivel Assembly.
  3. LG53VA - Seal kit for Valve Assembly.
   
Tel: +27 (0)11 493 8209, Fax: +27 (0)11 493 1459, Email: sales@adceng.co.za Previous page   Home page   Back to top