|
|
|
Products > LPG/NH3 Equipment > |
|
|
ADCENG liquified petroleum gas cylinder refilling units
are designed to enable distributors, dealers and retailers of LP gas to
refill all gas cylinder quickly, accurately and safely to SABS requirements.
The ADCENG range consists of five models:
|
|
|
BUSHFIL MODEL 301 D
|
|
BUSHFIL Model 301 D is the basic unit for application
where no electricity supply is available. It is a simple, rugged but effective
hand-operated double acting pump. For use in rural areas subject to approval
of the approving authority concerned.
|
|
| Specifications |
 |
Pump: |
|
Hand-operated |
|
|
Capacity: |
|
3,0 ℓ/min. (approx at 25 strokes/min.) |
|
 |
|
|
BUSHFIL MODEL 301-DH-SP
|
|
BUSHFIL Model 301-DH-SP is the basic hand-operated
unit but fitted with a scale for accurate filling. Complying with the
requirements of SANS 10087-7, this unit is suitable for filling cylinders
up to 9,0 kg capacity.
|
|
| Specifications |
|
|
Pump:
|
|
Hand-operated |
|
|
Capacity:
|
|
3,0 ℓ/min. (approx at 25 strokes/min.) |
|
|
Scale: |
|
Mechanical platform 100 kg cap. |
|
| |
|
Operating Instructions |
|
|
|
 |
|
|
POWERFIL MODEL DE-401-GB-MAN
|
|
POWERFIL Model DE-401-GB-MAN is identical to Model DE-401-GB-AUTO but supplied complete with a platform scale for manually controlled
filling.
|
|
| Specifications |
|
|
Pump: |
|
Electrically-driven |
|
|
Capacity: |
|
Capacity 6,0 ℓ/min |
|
|
Power Supply: |
|
220v 375W |
|
|
Scale: |
|
Mechanical platform 100 kg cap |
|
|
|
|
Operating Instructions |
|
|
|
 |
|
|
POWERFIL MODEL DE-401-GB-AUTO
|
|
POWERFIL Model DE-401-GB-AUTO is identical to the Model
DE-401-GB-MAN but features additional automatic shut-off facilities. This
unit is fitted with an intrinsically safe proximity sensor to SANS 549-1987
as well as a flameproof control module certified by the SABS test house
to SANS 65079 part 0 and 1.
|
|
| Specifications |
|
|
Pump:
|
|
Electrically-driven
|
|
|
Capacity:
|
|
Capacity 6,0 ℓ/min
|
|
|
Power Supply:
|
|
220v 375W
|
|
|
Scale: |
|
Mechanical platform 100 kg cap. |
|
| |
|
Operating Instructions |
|
|
|
 |
|
|
SMITH MODEL EG-1-SP
|
| SMITH Model EG-1-SP for filling larger cylinders up
to 48kg capacity manually. Complete with inlet and outlet hoses and valve
adaptors for all common cylinder makes. |
| |
| Specifications |
|
|
Pump:
|
|
Electrically-driven |
|
|
Capacity:
|
|
Capacity 20 ℓ/min |
|
|
Power Supply:
|
|
220v 600W |
|
 |
|
|
SMITH MODEL EGBP-1-SP-AUTO
|
|
SMITH Model EGBP-1-SP-AUTO This unit is baseplate mounted
with a 300 kg platform scale suitable for filling cylinders up to 48kg
capacity and features automatic shut-off facilities when cylinders are
full. The unit comes with an intrinsically safe proximity sensor to SANS
549-1987 and flameproof control module certified by the SABS test house
to SANS 65079 part 0 and 1. Electronic scales with LED read-outs are optional.
The load cell activated electronic scale with digital readout is SABS
approved and is optional on the Smith Model EGBP-1-SP AUTO pump.
|
|
| Specifications |
|
|
Pump:
|
|
Electrically-driven |
|
|
Capacity:
|
|
Capacity 20 ℓ/min. |
|
|
Power Supply:
|
|
220v 600W |
|
|
Scale: |
|
Mechanical platform 300kg cap. |
| |
Digital read-out version available |
|
| |
|
Operating Instructions |
|
|
|
|
|
|
AUTOMATIC LPG FILLING MACHINE FOR REFILLING
|
|
|
Model Gb-402-Electr With Electronic Scale
|
|
The electronic scale is of robust construction to withstand
the weighing and filling of steel containers under working conditions.
The scale has been specially prepared for filling gas containers. It will
ensure the filling of these small containers to within a close margin
of the allowable filling mass, provided that the filling operation is
carried out by a properly trained person. The electronic control panel
is available for direct mounting to the pump stand or alternatively for
remote mounting.
As an optional extra, a ticket printer can be provided. This unit can
also be linked to a PC with an RS232 card.
|
|
| Special design features |
|
The electric piston pump has been developed with a
view to overcoming the problems usually encountered with high revving
centrifugal gear or vane pumps when they are used for the filling of small
containers from upright 48 kg LPG supply containers. This pump is able
to cope with vapour locks which are encountered in this type of operation
and will not be damaged when run dry for a short period of time, e.g.
when the supply container is empty. This is achieved by the use of a special
type of piston fitted with U Type piston seal manufactured from a polycarbon
type material operating in a cylinder. The pump is also equipped with
an internal bypass for filling containers that have a restricted inlet
orifice. This is set to open at a differential pressure of 80 psi (550
kPa) and should not be altered otherwise permanent damage to the pump
might arise.
|
|
|
FLAMEPROOF MOTOR AND ELECTRICS
|
|
The electric motor supplied with this pump is a flameproof
type to SANS 314-1971 suitable for the requirements of SANS-0108 Class
1, Division 1.
|
|
|
The motor can be operated from a normal 220-240 Volt
AC, single phase, 15 amp electric mains supply, provided that the point
of supply (electric socket) is not within the hazardous area (defined
in SANS 087: Part VII 1972). The motor and connections comply with SANS
1031-1976 “Type E” – Apparatus for use in explosive gas atmosphere.
The intrinsically safe control module and switches are certified by the
Government Mining Engineer to meet SANS-314-1971.
|
 |
|
|
SCALES
|
|
The small but robust platform scale is assize-approved
and is suitable for filling cylinders up to 19 kg capacity under rough
working conditions. Its use by a qualified operator ensures that containers
are filled to permissible filling mass.
|
 |
)
)
)
)
)
)
)
