|
Products > LPG/NH3 Equipment > |
|
Z3200 MODEL CORO-VANE® TRUCK PUMPS
|
|
Z-Series Coro-Vane® truck pumps are specifically
designed to perform in such severe operating conditions as high differential
pressure, pump overspeeding, poor suction conditions and heavy thrust
loads associated with a power take-off (PTO) drive system.
|
| |
| Advantages |
|
|
 |
 |
Innovative cam design virtually eliminates cavitation |
|
|
New materials utilized in cam and blades extend pump life
|
|
|
Large diameter non-metallic pins are suitable for higher pump speeds
|
|
|
Locked rotor is factory set with shim adjusted thrust bearings which
are rated in excess of 4,000 lb |
|
|
|
Z3500 Stationary and Truck Pump |
|
Higher flow rates - faster loading and unloading. |
|
 |
|
|
|
The Z3500 pump offers the same locked rotor design used in other
Corken Z-series truck pumps. This and large diameter non-metallic
pins, which are not speed-sensitive, ensure longer pump life.
Maintenance is made simple with the removal of an inspection plate and
the high-tech materials used on the cam and pump blades are designed
to further extend the life of the pump. |
|
|
|
|
A three inch foot mounted pump designed for stationary and truck-mounted
applications, the Z3500 it is rated at 800 RPM as opposed to the more common 640
RPM. This gives it an improved flow rate over the Corken 1021, and even at 640
RPM, the flow rate is 7% up on the 1021. |
|
|
|
Product Applications |
|
Used for loading and unloading single and dual bobtails and
road tankers. |
|
|
|
Product Features |
|
|
Large diameter
non-metallic pins are not speed sensitive so you can operate the
pump at a higher RPM and not damage the pump. |
|
|
High tech materials
used on the cam and blades help extend the life of the pump. |
|
|
Up to 7% or more
capacity at 640 RPM. |
|
|
Unlike other three
inch stationary pumps rated at 640 RPM, the Z3500 is rated up to
800 RPM providing higher capacity without damage. |
|
|
Maintenance is made
simple. When it becomes necessary to service the pump, all you
need to do is remove twelve head bolts to inspect the bearings,
seals, sideplates, rotor, vanes and vane drivers. |
|
|
Retrofits the Corken
model 1021 stationary pump and other three-inch competitive
pumps with little or no change in piping. |
|
|
|
)
)
